ZUK
G o n e F i s h i n g Again
Too warm for ZUK to work in the shop....
(...gear assistance available Octoberish) ZUK
| Organized by category Version |
Toyota Gear Installs
Located in Chandler, AZ.(near Ray and Arizona)
updated--- AUGUST 2 2008
ARE 571 GEARS REALLY THAT WEAK?
Erik's Page / bearing numbers /terminology
Hypoid related links
Started getting a whistle and it's getting louder
Brian's 4Runner gets a Motive 571 rear gearset
Jim's F-Toy gets pro 571 gear installs
How to remove the 8" E-Locker motor assembly
1997 LX450 gets ARB RD124 with 529 Nitro Gear
Eric's 1997 FZJ80 Landcruiser upgrades to Precision 488 gears
Michael gets Precision 488s and a 4 cyl Aussie
ARB install in a new IFS front 1999 Land Cruiser (UZJ100)
My 529 Yukon gear teeth shattered on me
My brand new gears are whining
9.5" LC E-Locker gets cryo 529gears/bearings and a solid collar
Replacing noisy pinion bearings in a 1992 8" 3rd
Kazuma TRD LSD install in a Taco/T100 3rd
My 1995 Landcruiser's rear 3rd has a loud whine
Motive 488 and Eaton LSD in a Taco/T100 3rd
ARB install in a 2001 Tundra "non-TRD" rear 3rd
Landcruiser front 9.5" 3rd gets new 4.11 and Aussie
Canadian rear E-Locker gets cryogenic 488 Motive gears/bearings
Flexor's front 571 3rd gets "upgraded"
POW!!! went the 529 in the Front Hi-pinion ARB 3rd
My rear V6 3rd is getting noisy!
Marlin Crawler 529 high pinion gear install/Detroit Softlocker
My gears scream at me when I let off the gas!?!
1997 FJ80 488 front and rear E-Locker installs
A serious cryo TACO 488/ARB install for Kent
Cryo Motive 488 in an E-Locker
CRYOGENICS...A serious Motive 488 V6 install
Lockrite and Motive 488 in a 4 cyl 3rd
Taco Motive 456 install
Motive 488 in a V6 3rd open
Melted pinion bearing in a V6 3rd with Genuine gear
Cryo treated Yukon 529 install/4 cyl 3rd
488 MOTIVES in a Hawaiian third
Taco 3rd gets Motive 488 gears and ARB
Help! Gears sound like a washing machine on spin cycle
Precision 456/TT in a V6 3rd
PRECISION 488
Sportsman V6 529 gear install
Taco rear 456 install and a SOLID COLLAR
Aussie and Precision 529 in a 4 cyl 3rd.
Rockhound's own 529 gear repair
Motive 529 gears and a rear Truetrac in a 4 cyl 3rd
Refresh those carrier bearings and double the strength
529 Hi-pinion build with EZ Locker
488 US GEAR V6 install/Lockrite
488 Yukon install into an 85 truck
RD01 ARB install and 529 gears
New improved air bearing for the non-trd Taco ARB's
Making a V6 spool fit in a "4 cyl 3rd"
Richmond V6 488 into Jake's E-Locker
529 rear gears for Eric
EMERGENCY 571 repair
Kyles Yukon 529 pro gear install (cryo'd and heat treated)
Autopsy and Yukon 488 install
Aussie Locker and 529 gears
PRECISION 571 gears front and rear
Hawaiian 488 Yukon install
A good strong 571 8" install
Inspection of a late 90's Taco/Runner front carrier hi-pinion
DSL and 529 Yukons in a 4 cyl 3rd
Quik-Lok check and a refresh
Autopsy on V6 3rd and 488 install
ARB in a 1996 Taco rear
E-Locker gets 529 Cryogenic gears
Basketcase gets 529 gears
ZUK-my Supra 3rd needs a health check!
ARB install in a front 8" 3rd
Rebuilt 3rd gets 488 Yukon gears
IFS 7.5" front gets 529 US GEARS
Dis-assembled E-Locker gets 529 gears
How to install an Aussie by yourself
IFS front gets 529 Yukon gears
Jeff gets 488 Yukons/solid collar
How to freshen up the carrier bearing pre-load
"4 cyl 3rd" gets Yukon 529 and Aussie Locker
Sergio's E-Locker gets Yukon 488 gears
Cryo-treated factory 410 used gear install
Cryo-treated Precision 571 gear install
Supra LSD into an open V6 3rd
Aussie install into a re-freshed stock 3rd
E-Locker and "4 cyl" 488 gear install
"Mayday! Mayday! Gears starting to rumble..."
"My new gears HUM after Kittery Point shop installs them"
Zack gets 529 gears and a Detroit "HardLocker"
529 PRECISION gears/Detroit in V6 chunk
488 gear install into an E-Locker
Chunk #1 529 pro-build (open)
Cost cutting 529 install
571 US GEAR install into 8" 3rd
Removing the front IFS 3rd
571 Motive gear install in IFS 7.5"
Bob's 488 early '4 cyl' gear install and Aussie
4 cyl gears in a V6 3rd
Flexor's front 571 US GEAR install
Justin 529 Yukon/spool install
571 US GEAR install
Kyron's spool/529 gear install
Josh's 529 V6 gears in V6 3rd install
Chris's 529 US GEAR install
Sam's Genuine Gear install (UPDATED axle breakage info added 1-29-2007)
Colby's 4.88 US GEAR install
Supra LSD in a V6 3rd
Toyota V6 gears/Aussie/4cyl third
Sterling's 5.29 gear install
Shannon's 5.29 gear install
Used gears
Gear patterns 1
Dana60 6.17 gear install
Dana44 410 gear install (Chris)
$75 Dana 44 build-up
